- Sizes
- 60–160 µm / Particle size pending technical verification
WC-10Co-4Cr
WC-10Co-4Cr thermal spray powder
Maximum operating temperature 500℃; Hard and dense coating, abrasive wear, corrosion wear, erosion wear; Instead of hard chromium plating; CoCr bond has higher corrosion resistance and wear resistance than Co bond phase, which is suitable for (moisture) wet corrosion environment. Mainly used in aircraft landing gear, gate valve and ball valve, paper rod, hydraulic cylinder, compressor rod, metallurgical rolling series, mechanical parts etc.
- Material
- Co9-11,Cr3.5-4.5%,C5.4-5.9%,OTHER 0.5%
- Manufacturing process
- Sintered & crushed
- Morphology
- Irregular
Specifications & website prices
| Particle size | Process | Original website price | MOQ |
|---|---|---|---|
| 15–45 µm | Sintered & crushed | $48.50 /KgOriginal page #legacy-763 ↗ | 15 Kg |
Each price retains the specification, currency and unit of its source listing. Confirm current availability and delivery with WOCO.

Product overview
WC-10Co-4Cr · Product description & applications
Model-level information transcribed from the WOCO product overview. Listed applications are examples; suitability and coating qualification depend on your process. Reference grades are separate from the priced specifications above.
- Maximum operating temperature 500℃;
- Hard and dense coating, abrasive wear, corrosion wear, erosion wear;
- Instead of hard chromium plating;
- CoCr bond has higher corrosion resistance and wear resistance than Co bond phase, which is suitable for (moisture) wet corrosion environment.
- Mainly used in aircraft landing gear, gate valve and ball valve, paper rod, hydraulic cylinder, compressor rod, metallurgical rolling series, mechanical parts etc.
Grade specifications from the product overview
| Grade | Particle size | T.C % | Co % | Cr % | Fe % | O % | Process | Apparent density (g/cm³) | Hall flowability (s/50g) |
|---|---|---|---|---|---|---|---|---|---|
| FB109-2 | 20–53 µm | 5.0-6.0 | 9.0-10.5 | 3.0-4.5 | ≤1.0 | ≤0.5 | Sintered & Crushed | ≥4 g/cm³ | ≤25 s/50g |
| FB110-5 | 20–45 µm | 5.0-6.0 | 9.0-10.5 | 3.0-4.5 | ≤1.0 | ≤0.5 | Sintered & Crushed | ≥4 g/cm³ | ≤25 s/50g |
| FB111-3 | 15–45 µm | 5.0-6.0 | 9.0-10.5 | 3.0-4.5 | ≤1.0 | ≤0.5 | Sintered & Crushed | ≥4 g/cm³ | ≤25 s/50g |
| FA113-2 | 20–53 µm | 5.0-6.0 | 9.0-10.5 | 3.0-4.5 | ≤0.15 | ≤0.5 | Agglomerated & Sintered | ≥4 g/cm³ | ≤18 s/50g |
| FA114-5 | 20–45 µm | 5.0-6.0 | 9.0-10.5 | 3.0-4.5 | ≤0.15 | ≤0.5 | Agglomerated & Sintered | ≥4 g/cm³ | ≤18 s/50g |
| FA115-3 | 15–45 µm | 5.0-6.0 | 9.0-10.5 | 3.0-4.5 | ≤0.15 | ≤0.5 | Agglomerated & Sintered | ≥4 g/cm³ | ≤18 s/50g |
| FA116-6 | 11–45 µm | 5.0-6.0 | 9.0-10.5 | 3.0-4.5 | ≤0.15 | ≤0.5 | Agglomerated & Sintered | ≥4 g/cm³ | ≤18 s/50g |
| FA117-7 | 10–38 µm | 5.0-6.0 | 9.0-10.5 | 3.0-4.5 | ≤0.15 | ≤0.5 | Agglomerated & Sintered | ≥4 g/cm³ | ≤18 s/50g |
| FA118-8 | 10–30 µm | 5.0-6.0 | 9.0-10.5 | 3.0-4.5 | ≤0.15 | ≤0.5 | Agglomerated & Sintered | ≥4 g/cm³ | ≤18 s/50g |
HVOF process reference & reported coating results
The following values belong to the stated process setup in the product overview. They are starting references, not a guarantee for other equipment, substrates, grades or production runs.
Reference process conditions
| Powder | WC-10Co-4Cr |
|---|---|
| Process type | Agglomerated & Sintered |
| Particle size | 45-15 µm |
| Spraying gun | JP5000 |
| Gun barrel | 6 inch |
| Kerosene | 24 L/h |
| Oxygen | 944 L/min |
| Carrier gas | 7.5 L/min |
| Powder feed rate | 70-80 g/min |
| Spraying distance | 340-380 mm |
Coating results in the overview
| Hardness | 1150-1400 HV0.3 |
|---|---|
| Bonding strength | >70 MPa |
| Deposition efficiency | 45-55 % |
| Porosity | <1 % |
Technical documents
Batch reports apply to the identified batch. Ask WOCO for documents relating to your order.
Product images & original specifications
- Product Name
- Tungsten spray powder
- Specification
- WC-10Co-4Cr
- Category
- Thermal spraying
- Product Size
- 15–45 µm
- Grade
- WC-10Co-4Cr
- performance
- Hardness:850-1400HV0.3,Bonding strength:>70Mpa,Porosity:<1%,Oxygen content:<1%
- Component
- Co9-11,Cr3.5-4.5%,C5.4-5.9%,OTHER 0.5%
- MOQ
- 15Kg
Available specifications & supply reference
Original listing information is preserved below. Stock, delivery and freight are subject to current confirmation.
These are dated supplier listings. Their original prices and validity periods are shown for reference; ask WOCO for a current quotation.
| Specification | Packaging | Listing date / validity |
|---|---|---|
| 15–45 µm | On request | 2017-01-10 · 30days |
Original supply details
- Origin
- Chengdu
- Validity
- 30days
- Area
- Chengdu
- Post date
- 2017-01-10
