A carbide component enquiry needs more than a grade name. The component drawing connects geometry, dimension units, tolerances and the surfaces that matter in use. A catalogue size is a starting reference for that discussion.
Read the source dimension string first
The K30 insert listing records 70/47.9*180*6 millimeter. The 10UF sprayer listing records 13*0.6*20 millimeter. These are different product forms; the individual figures should not be assigned to length, width, bore or thickness without the drawing.
Confirm tolerance units and the dimension basis
The K30 source lists ±0.3 and the 10UF source lists +0.1/-0.1. Neither field explicitly states its unit or datum basis. Those values remain source references, with the production tolerance marked for confirmation in the enquiry. A millimeter dimension field alone does not establish the unit or meaning of a separate tolerance field.
What to include with a drawing
- Drawing number, revision and the required material grade.
- Dimension units, critical tolerances and datum references.
- Surface finish, mating dimensions and the working conditions.
- Blank, semi-finished or finished state, quantity and packaging requirements.
- Inspection records or other acceptance documents required for the purchase.
Use the quote action beside the relevant dimension record to carry its model and specification into the conversation. Send the drawing privately and leave a reply email. Confirm the final drawing requirements with WOCO before production.
Product examples with source records
Related materials
K30
Tungsten carbide plates & strips
- Sizes
- 70/47.9*180*6 / 79.1/50.9*230*6 / 71.2/43*230*6 …
10UF
Mould bases
- Sizes
- 266*90*40 millimeter
