Tungsten-based powders

WC12Co

WC12Co tungsten carbide composite powder

Agglomerated & sintered or sintered & crushed gray/black spherical or near-spherical particles, with good fluidity; Maximum operating temperature 500℃; High hardness, dense coating, wear-resistant particle wear, fretting wear, adhesive wear, erosion wear High fracture toughness Mainly used in mechanical parts, oil and gas equipment, metallurgical rolls, pump sealing parts, etc

Material
WC,Co,
Manufacturing process
Sintered & crushed
Morphology
crushed

Specifications & website prices

Particle sizeProcessOriginal website priceMOQ
45–125 µmSintered & crushed$89.00 / KgOriginal page #6092 ↗5 KG
45–125 µmSintered & crushed$89.00 / KgOriginal page #6093 ↗5 KG
90–125 µmSintered & crushed$89.00 / KgOriginal page #6091 ↗5 KG
45–90 µm; 90–150 µm; 150–250 µmSintered & crushed$92.00 / KgOriginal page #6089 ↗5 KG

Each price retains the specification, currency and unit of its source listing. Confirm current availability and delivery with WOCO.

Product overview ↓
WC12Co tungsten carbide composite powder
Product reference image

Batch test results

These are historical batch measurements, separate from the product specifications and overview reference grades. Results apply only to the named batch and particle-size band. Request the documents for the material being offered.

Batch YF12-0127

Original COA ↗
Material
WC12Co
Report size
45–125 µm
Report date
2026-01-30
Reported shape
Irregular
WC12Co · 45–125 µm · YF12-0127
Test item / size fractionReported resultMethod / scope
W81.99 %Chemical analysis; method not stated in the report.
Co11.64 %Chemical analysis; method not stated in the report.
Fe0.83 %Chemical analysis; method not stated in the report.
Ct5.54 %Chemical analysis; method not stated in the report.
Apparent density6.76 g/cm³Physical analysis as reported.
Hall flowability10 s/50 gPhysical analysis as reported.
+150 µm0 %Sieve analysis; distribution fraction as reported.
−150+125 µm0.0049 %Sieve analysis; distribution fraction as reported.
−125+90 µm24.38 %Sieve analysis; distribution fraction as reported.
−90+75 µm26 %Sieve analysis; distribution fraction as reported.
−75+63 µm22.9 %Sieve analysis; distribution fraction as reported.
−63+45 µm24 %Sieve analysis; distribution fraction as reported.
−45 µm2.7 %Sieve analysis; distribution fraction as reported.

Bal / balance is preserved as printed; no residual percentage is calculated. The certificate does not state a manufacturing process.

Product overview

WC-12Co · Product description & applications

Model-level information transcribed from the WOCO product overview. Listed applications are examples; suitability and coating qualification depend on your process. Reference grades are separate from the priced specifications above.

  • Agglomerated & sintered or sintered & crushed gray/black spherical or near-spherical particles, with good fluidity;
  • Maximum operating temperature 500℃;
  • High hardness, dense coating, wear-resistant particle wear, fretting wear, adhesive wear, erosion wear
  • High fracture toughness
  • Mainly used in mechanical parts, oil and gas equipment, metallurgical rolls, pump sealing parts, etc

Grade specifications from the product overview

GradeParticle sizeT.C %Co %Fe %O %ProcessApparent density (g/cm³)Hall flowability (s/50g)
FB101-145–105 µm5.2-5.911.5-12.5≤1≤0.3Sintered & Crushed6.5–7.0 g/cm³9–11 s/50g
FB102-220–53 µm5.2-5.911.5-12.5≤1≤0.3Sintered & Crushed6.2–6.6 g/cm³10–12 s/50g
FB103-315–45 µm5.2-5.911.5-12.5≤1≤0.3Sintered & Crushed5.6-6.2 g/cm³11–14 s/50g
FB104-45–25 µm5.2-5.911.5-12.5≤1≤0.3Sintered & Crushed5.0–5.5 g/cm³—
FB105-220–53 µm4.9-5.411.5-12.5≤1≤0.3Sintered & Crushed6.2–6.6 g/cm³10–12 s/50g
FA101-145–105 µm5.2-6.011.5-12.5≤0.15≤0.2Agglomerated & Sintered4.8-5.4 g/cm³9–12 s/50g
FA102-220–53 µm5.2-6.011.5-12.5≤0.15≤0.2Agglomerated & Sintered4.8-5.2 g/cm³10–13 s/50g
FA103-315–45 µm5.2-6.011.5-12.5≤0.15≤0.2Agglomerated & Sintered4.8-5.2 g/cm³10–14 s/50g
FA104-45–25 µm5.2-6.011.5-12.5≤0.15≤0.2Agglomerated & Sintered4.2-4.8 g/cm³—
FA105-3D15–45 µm4.9-5.411.5-12.5≤0.15≤0.2Agglomerated & Sintered4.7-5.2 g/cm³10–14 s/50g
FA106-315–45 µm5.2-6.011.5-12.5≤0.15≤0.2Agglomerated & Sintered4.1-4.5 g/cm³10–14 s/50g

HVOF process reference & reported coating results

The following values belong to the stated process setup in the product overview. They are starting references, not a guarantee for other equipment, substrates, grades or production runs.

Reference process conditions

PowderWC-12Co
Process typeAgglomerated & Sintered
Particle size45-15 µm
Spraying gunJP5000
Gun barrel6 inch
Kerosene22.7 L/h
Oxygen944 L/min
Carrier gas7.5 L/min
Powder feed rate70-100 g/min
Spraying distance350-380 mm

Coating results in the overview

Hardness1100-1300 HV0.3
Bonding strength>70 MPa
Deposition efficiency40-50 %
Porosity<1 %

View the original product overview ↗

Product images & original specifications

Product Code
wocoWOCO
Model
WC12Co
Processing Level
Sintering crushing
Grade
crushed
Specification
45–125 µm90–125 µm45–90 µm; 90–150 µm; 150–250 µm
Tolerance
customizable MM

Composition

WC,Co,

Performance Index

Corrosion resistance, high temperature resistance, oxidation resistance

Packing Instructions

Iron drum /plastic/can be customized

Composition

WC,Co

WC12Co — Product Image
Product Image
WC12Co — Details Image / Performance Index
Details Image / Performance Index
WC12Co — Design Image / Product Image / Details Image
Design Image / Product Image / Details Image
WC12Co — Composition / Product Image
Composition / Product Image
WC12Co — Performance Index
Performance Index
WC12Co — Packing Instructions
Packing Instructions
WC12Co — Packing Instructions
Packing Instructions
WC12Co — Details Image
Details Image
WC12Co — Design Image
Design Image
WC12Co — Design Image
Design Image
WC12Co — Composition
Composition
WC12Co — Performance Index
Performance Index
WC12Co — Packing Instructions
Packing Instructions

Available specifications & supply reference

Original listing information is preserved below. Stock, delivery and freight are subject to current confirmation.

SpecificationPackagingListing date / validity
45–125 µmIron drum /plastic/can be customized—
45–125 µmIron drum /plastic/can be customized—
90–125 µmIron drum /plastic/can be customized—
45–90 µm; 90–150 µm; 150–250 µmIron drum /plastic/can be customized—

Original supply details

Origin
China Sichuan
Operator telephone
+8613540134090 +86135401340900086 +8613540134090
Operator email
sales-manager301@wococarbide.com

Product questions

Do these batch results apply to every specification?

No. The results shown belong to batch YF12-0127 at 45–125 µm. They do not certify another size band or a future shipment. Ask for documents for the offered batch.

How do I request this specification?

Use Request a quote beside the required size. The saved request includes the model, selected specification and reply email. State quantity, process and document requirements in your message.

Material selection guides

All technical guides ↗

Technical support

Discuss your application, material and specification with WOCO.