Tungsten-based powders

WC12Co

WC12Co tungsten carbide composite powder

Agglomerated & sintered or sintered & crushed gray/black spherical or near-spherical particles, with good fluidity; Maximum operating temperature 500℃; High hardness, dense coating, wear-resistant particle wear, fretting wear, adhesive wear, erosion wear High fracture toughness Mainly used in mechanical parts, oil and gas equipment, metallurgical rolls, pump sealing parts, etc

Manufacturing process
Agglomerated & sintered

Specifications & website prices

Particle sizeProcessOriginal website priceMOQ
15–45 µmAgglomerated & sintered$50.00 / KgOriginal page #5874 ↗5 KG

Each price retains the specification, currency and unit of its source listing. Confirm current availability and delivery with WOCO.

Product overview ↓
WC12Co tungsten carbide composite powder
Product reference image

Batch test results

These are historical batch measurements, separate from the product specifications and overview reference grades. Results apply only to the named batch and particle-size band. Request the documents for the material being offered.

Batch YQ12-0717

Original COA ↗
Material
WC12Co
Report size
15–45 µm
Report date
2023-10-18
Reported shape
Spherical
WC12Co · 15–45 µm · YQ12-0717
Test item / size fractionReported resultMethod / scope
Co11.67 %Chemical analysis; method not stated in the report.
Fe0.12 %Chemical analysis; method not stated in the report.
Ct5.3 %Chemical analysis; method not stated in the report.
WBalChemical analysis; balance as printed, not calculated.
Apparent density5.06 g/cm³Physical analysis as reported.
Hall flowability10.32 s/50 gPhysical analysis as reported.
+45 µm0.78 %Sieve analysis; distribution fraction as reported.
−45+15 µmBalSieve analysis; distribution fraction as reported.
−15 µm1.5 %Sieve analysis; distribution fraction as reported.

Bal / balance is preserved as printed; no residual percentage is calculated. The certificate does not state a manufacturing process.

The laser-diffraction column contains D10/D50/D90 values beneath a percent heading. Their units need confirmation; those values are not presented as verified particle diameters.

Product overview

WC-12Co · Product description & applications

Model-level information transcribed from the WOCO product overview. Listed applications are examples; suitability and coating qualification depend on your process. Reference grades are separate from the priced specifications above.

  • Agglomerated & sintered or sintered & crushed gray/black spherical or near-spherical particles, with good fluidity;
  • Maximum operating temperature 500℃;
  • High hardness, dense coating, wear-resistant particle wear, fretting wear, adhesive wear, erosion wear
  • High fracture toughness
  • Mainly used in mechanical parts, oil and gas equipment, metallurgical rolls, pump sealing parts, etc

Grade specifications from the product overview

GradeParticle sizeT.C %Co %Fe %O %ProcessApparent density (g/cm³)Hall flowability (s/50g)
FB101-145–105 µm5.2-5.911.5-12.5≤1≤0.3Sintered & Crushed6.5–7.0 g/cm³9–11 s/50g
FB102-220–53 µm5.2-5.911.5-12.5≤1≤0.3Sintered & Crushed6.2–6.6 g/cm³10–12 s/50g
FB103-315–45 µm5.2-5.911.5-12.5≤1≤0.3Sintered & Crushed5.6-6.2 g/cm³11–14 s/50g
FB104-45–25 µm5.2-5.911.5-12.5≤1≤0.3Sintered & Crushed5.0–5.5 g/cm³—
FB105-220–53 µm4.9-5.411.5-12.5≤1≤0.3Sintered & Crushed6.2–6.6 g/cm³10–12 s/50g
FA101-145–105 µm5.2-6.011.5-12.5≤0.15≤0.2Agglomerated & Sintered4.8-5.4 g/cm³9–12 s/50g
FA102-220–53 µm5.2-6.011.5-12.5≤0.15≤0.2Agglomerated & Sintered4.8-5.2 g/cm³10–13 s/50g
FA103-315–45 µm5.2-6.011.5-12.5≤0.15≤0.2Agglomerated & Sintered4.8-5.2 g/cm³10–14 s/50g
FA104-45–25 µm5.2-6.011.5-12.5≤0.15≤0.2Agglomerated & Sintered4.2-4.8 g/cm³—
FA105-3D15–45 µm4.9-5.411.5-12.5≤0.15≤0.2Agglomerated & Sintered4.7-5.2 g/cm³10–14 s/50g
FA106-315–45 µm5.2-6.011.5-12.5≤0.15≤0.2Agglomerated & Sintered4.1-4.5 g/cm³10–14 s/50g

HVOF process reference & reported coating results

The following values belong to the stated process setup in the product overview. They are starting references, not a guarantee for other equipment, substrates, grades or production runs.

Reference process conditions

PowderWC-12Co
Process typeAgglomerated & Sintered
Particle size45-15 µm
Spraying gunJP5000
Gun barrel6 inch
Kerosene22.7 L/h
Oxygen944 L/min
Carrier gas7.5 L/min
Powder feed rate70-100 g/min
Spraying distance350-380 mm

Coating results in the overview

Hardness1100-1300 HV0.3
Bonding strength>70 MPa
Deposition efficiency40-50 %
Porosity<1 %

View the original product overview ↗

Product images & original specifications

Product Code
WC12Co
Model
WC12Co
Processing Level
Agglomerated sintered
Grade
WC12Co
N.W
5 KG
Specification
15–45 µm
Tolerance
0 UM
WC12Co — Product Image
Product Image
WC12Co — Details Image
Details Image
WC12Co — Design Image
Design Image
WC12Co — Composition
Composition
WC12Co — Performance Index
Performance Index
WC12Co — Packing Instructions
Packing Instructions
WC12Co — Additional product image
Additional product image
WC12Co — Additional product image
Additional product image
WC12Co — Additional product image
Additional product image

Available specifications & supply reference

Original listing information is preserved below. Stock, delivery and freight are subject to current confirmation.

SpecificationPackagingListing date / validity
15–45 µmOn request—

Original supply details

Origin
CHINA
Operator telephone
0086 +86 19136202396
Operator email
sales-manager202@wococarbide.com

Product questions

Do these batch results apply to every specification?

No. The results shown belong to batch YQ12-0717 at 15–45 µm. They do not certify another size band or a future shipment. Ask for documents for the offered batch.

How do I request this specification?

Use Request a quote beside the required size. The saved request includes the model, selected specification and reply email. State quantity, process and document requirements in your message.

Material selection guides

All technical guides ↗

Technical support

Discuss your application, material and specification with WOCO.