- Sizes
- 60–160 µm / Particle size pending technical verification
WC12Co
WC12Co tungsten carbide composite powder
Agglomerated & sintered or sintered & crushed gray/black spherical or near-spherical particles, with good fluidity; Maximum operating temperature 500℃; High hardness, dense coating, wear-resistant particle wear, fretting wear, adhesive wear, erosion wear High fracture toughness Mainly used in mechanical parts, oil and gas equipment, metallurgical rolls, pump sealing parts, etc
- Material
- WC,Co,Ni,Fe
- Morphology
- Spherical
Specifications & website prices
| Particle size | Process | Original website price | MOQ |
|---|---|---|---|
| 15–25 µm | Confirm with enquiry | $348.00 / KgOriginal page #6102 ↗ | 5 KG |
Each price retains the specification, currency and unit of its source listing. Confirm current availability and delivery with WOCO.

Product overview
WC-12Co · Product description & applications
Model-level information transcribed from the WOCO product overview. Listed applications are examples; suitability and coating qualification depend on your process. Reference grades are separate from the priced specifications above.
- Agglomerated & sintered or sintered & crushed gray/black spherical or near-spherical particles, with good fluidity;
- Maximum operating temperature 500℃;
- High hardness, dense coating, wear-resistant particle wear, fretting wear, adhesive wear, erosion wear
- High fracture toughness
- Mainly used in mechanical parts, oil and gas equipment, metallurgical rolls, pump sealing parts, etc
Grade specifications from the product overview
| Grade | Particle size | T.C % | Co % | Fe % | O % | Process | Apparent density (g/cm³) | Hall flowability (s/50g) |
|---|---|---|---|---|---|---|---|---|
| FB101-1 | 45–105 µm | 5.2-5.9 | 11.5-12.5 | ≤1 | ≤0.3 | Sintered & Crushed | 6.5–7.0 g/cm³ | 9–11 s/50g |
| FB102-2 | 20–53 µm | 5.2-5.9 | 11.5-12.5 | ≤1 | ≤0.3 | Sintered & Crushed | 6.2–6.6 g/cm³ | 10–12 s/50g |
| FB103-3 | 15–45 µm | 5.2-5.9 | 11.5-12.5 | ≤1 | ≤0.3 | Sintered & Crushed | 5.6-6.2 g/cm³ | 11–14 s/50g |
| FB104-4 | 5–25 µm | 5.2-5.9 | 11.5-12.5 | ≤1 | ≤0.3 | Sintered & Crushed | 5.0–5.5 g/cm³ | — |
| FB105-2 | 20–53 µm | 4.9-5.4 | 11.5-12.5 | ≤1 | ≤0.3 | Sintered & Crushed | 6.2–6.6 g/cm³ | 10–12 s/50g |
| FA101-1 | 45–105 µm | 5.2-6.0 | 11.5-12.5 | ≤0.15 | ≤0.2 | Agglomerated & Sintered | 4.8-5.4 g/cm³ | 9–12 s/50g |
| FA102-2 | 20–53 µm | 5.2-6.0 | 11.5-12.5 | ≤0.15 | ≤0.2 | Agglomerated & Sintered | 4.8-5.2 g/cm³ | 10–13 s/50g |
| FA103-3 | 15–45 µm | 5.2-6.0 | 11.5-12.5 | ≤0.15 | ≤0.2 | Agglomerated & Sintered | 4.8-5.2 g/cm³ | 10–14 s/50g |
| FA104-4 | 5–25 µm | 5.2-6.0 | 11.5-12.5 | ≤0.15 | ≤0.2 | Agglomerated & Sintered | 4.2-4.8 g/cm³ | — |
| FA105-3D | 15–45 µm | 4.9-5.4 | 11.5-12.5 | ≤0.15 | ≤0.2 | Agglomerated & Sintered | 4.7-5.2 g/cm³ | 10–14 s/50g |
| FA106-3 | 15–45 µm | 5.2-6.0 | 11.5-12.5 | ≤0.15 | ≤0.2 | Agglomerated & Sintered | 4.1-4.5 g/cm³ | 10–14 s/50g |
HVOF process reference & reported coating results
The following values belong to the stated process setup in the product overview. They are starting references, not a guarantee for other equipment, substrates, grades or production runs.
Reference process conditions
| Powder | WC-12Co |
|---|---|
| Process type | Agglomerated & Sintered |
| Particle size | 45-15 µm |
| Spraying gun | JP5000 |
| Gun barrel | 6 inch |
| Kerosene | 22.7 L/h |
| Oxygen | 944 L/min |
| Carrier gas | 7.5 L/min |
| Powder feed rate | 70-100 g/min |
| Spraying distance | 350-380 mm |
Coating results in the overview
| Hardness | 1100-1300 HV0.3 |
|---|---|
| Bonding strength | >70 MPa |
| Deposition efficiency | 40-50 % |
| Porosity | <1 % |
Technical documents
Batch reports apply to the identified batch. Ask WOCO for documents relating to your order.
Product images & original specifications
- Product Code
- WOCO
- Model
- WC12Co
- Processing Level
- Spherical
- Grade
- Spherical
- Specification
- 15–25 µm
Composition
WC,Co,Ni,Fe
Performance Index
Corrosion resistance, high temperature resistance, oxidation resistance
Packing Instructions
Iron drum /plastic/can be customized
Available specifications & supply reference
Original listing information is preserved below. Stock, delivery and freight are subject to current confirmation.
| Specification | Packaging | Listing date / validity |
|---|---|---|
| 15–25 µm | Iron drum /plastic/can be customized | — |
Original supply details
- Origin
- China Sichuan
- Operator telephone
- +8613540134090 +8613540134090
- Operator email
- sales-manager301@wococarbide.com
Material selection guides
Agglomerated and sintered vs sintered and crushed powders
Compare manufacturing route, morphology and declared powder properties using two WOCO WC10Co4Cr grades.
Reading powder sizes: 15–45 µm, −45+15 and Dv50
Understand a size-band designation, volume percentiles and why sieve and laser results need different acceptance criteria.
TDS, SDS and batch COA: which powder documents do you need?
Separate product specifications, handling information and lot-specific results, with a checklist for powder procurement.
WC-Co or WC-CoCr? Start with the service environment
Compare the binder system, operating environment and actual powder grade before choosing a tungsten carbide coating powder.
What to include in an HVOF powder enquiry
A practical RFQ checklist covering material, process, particle size, quantity, destination and required documents.









