Carbide component dimensions, tolerances & drawings

Read source-listed component dimensions without guessing their axes or tolerance units, and prepare a drawing-based enquiry.

A carbide component enquiry needs more than a grade name. The component drawing connects geometry, dimension units, tolerances and the surfaces that matter in use. A catalogue size is a starting reference for that discussion.

Read the source dimension string first

The K30 insert listing records 70/47.9*180*6 millimeter. The 10UF sprayer listing records 13*0.6*20 millimeter. These are different product forms; the individual figures should not be assigned to length, width, bore or thickness without the drawing.

Confirm tolerance units and the dimension basis

The K30 source lists ±0.3 and the 10UF source lists +0.1/-0.1. Neither field explicitly states its unit or datum basis. Those values remain source references, with the production tolerance marked for confirmation in the enquiry. A millimeter dimension field alone does not establish the unit or meaning of a separate tolerance field.

What to include with a drawing

Use the quote action beside the relevant dimension record to carry its model and specification into the conversation. Send the drawing privately and leave a reply email. Confirm the final drawing requirements with WOCO before production.

Product examples with source records

Related materials

K30

Tungsten carbide plates & strips

Sizes
70/47.9*180*6 / 79.1/50.9*230*6 / 71.2/43*230*6 …
Product details

All material guides ↗

Technical support

Discuss your application, material and specification with WOCO.